新闻资讯

News Center

current position: Home > News Center > Lighting ELF

How to replace the broken LED lamp?

2022-07-19 14:43:34
times

Now the interior decoration design pays attention to harmony and beauty, and the selection requirements for lamps are getting higher and higher. As a tool for indoor lighting, the role of lamps is becoming more and more important, but there are often quality problems in lamps. How to replace LED lamps? The following editor tells you the precautions for lamp replacement!


Smart Lighting


1. Replacing the LED ceiling lamp: When replacing the LED ceiling lamp, take off the original rectifier and replace it with a new one, because the rectifier and the wick of the LED lamp are integrated, and the wick is fixed on the chassis. That's it.


2. Replacing the incandescent lamp: When replacing the incandescent lamp, during the process of removing the bulb, do not touch the metal part at the bottom of the bulb to prevent danger. When replacing the bulb, hold the part close to the lamp socket with your hand to prevent accidents during disassembly.


3. Replacing the spotlight: There are spring clips on the back of the ceiling spotlight. When dismantling, you should hold the two sides of the lampshade with your hands and gently pull down, keep pressing the spring, and release the spring after the disassembly is completed. Be careful Injuried. Just connect the driver and lamp in the white square box with the black clip, and then pull out the black clip, and you're done.


Recently Viewed:

Related products

news.related_news

Jiangmen Raynice Lighting Appliance Co., LTD. (Headquarter)

Address: No. 11, Minghui Road, Jianghai high tech Industrial Park, Jiangmen, Guangdong

Tel.: (+ 86) 0750-8522588

Time&Light Theme Pavilion

Address: 10th floor, Xingguang alliance, Guzhen, Zhongshan, Guangdong

Tel.: (+ 86) 0760-22358599

Copyright © Jiangmen Raynice Lighting Appliance Co., Ltd All rights reserved Record No.:粤ICP备11105137号
Article | Region | Site map | RSS | XML